Manufacturers & Exporters of - Ink Jet Coding, Batch Printing, Labeling & Packaging Systems

 

 << Please Visit here

    

OUR PRODUCTS

 

 

 

 

HAND HELD CODER - MODEL HHC

 

AIMS compact, light weight and reliable hand held coder for roll-printing B.No., Mfg.Dt., Exp.Dt., M.R.P. Rs., Ingredients, Destination Address, Logos, etc. on corrugated cartons, plywood, wooden crates, paper bags, cement/asbestos sheets, leather cloth, HDPE woven sacks, etc. Model_HHC_95_SP.

 

 

 

 

 

 

 

The HHC-95 is the standard, most convenient & easy to use marker for regular printing on cartons, etc.

 

 

 

 

 

The HHC-190 marker is used in where a lot of lines of data, address, etc. is to be printed in one stroke.

 

 

 

 

 

 

The HHC-50 marker is a very small & convenient marker to print small amount of information on plastic / paper bags & cartons.

INTRODUCTION:

 

These Hand Coders are easy to use large character printers for in-house printing on corrugated master cartons & barrels.

 

The message to be printed is very easily composed by just push fitting the grooved stereos (easily changeable) on to the groove ring drum. The inking system consists of a rechargeable ink cartridge, which can be used for porous and non-porous surfaces.

 

When you place the coder on the carton & roll it, the stereos automatically get inked & print very clearly on the substrate in one action.

 

When you pick up the marker, the print drum automatically rotates back to the zero position due to the inbuilt spring action, ready for the next printing which will be from the start of the message at the same position.

 

FEATURES:

 

*   Very compact, lightweight portable and low cost model,

     which can be carried to any location.

 

*   A message can be composed and marked in minutes.

     Even unskilled worker can easily use the machine.

 

*   It is equipped with a tension spring that returns the

    marker to its zero position after every stroke. In the

    process the type gets re-inked as it passes below the ink

    roller and is ready for use again.

 

*   The handy marker is equipped with a large capacity, long

     lasting ink roller, which is especially formulated to

     release uniform quantity of ink for each impression

     without need for frequent re-inking.

 

*   Special grooved alphanumeric rubber stereo set

     consisting of A to Z, 0 to 9 & symbols, all in multiple

     quantities & size from 3 mm. to 39 mm., for easy

     message composing are available. No need to maintain

     an inventory of stencils or pre-printed labels for your

     shippers.

 

*   Logos, emblems, monograms, composite strips, etc. can

    be made to order as per your design and artwork.

 

 

SPECIFICATIONS :

 

 

 

VARIATIONS / DIFFERENT MODELS:

 

Model HHC -     95 - [][] with printing area of 95 mm. X 350 mm.

Model HHC -   190 - [][] with printing area of 195 mm. X 350 mm.

Model HHC -     50 - [][] with printing area of 50 mm. X 195 mm.

Model HHC - [][][] - S[] with standard spring return to zero position.

Model HHC - [][][] - C[] without spring for continuous printing.

Model HHC - [][][] - []P with porous ink for corrugated cartons.

Model HHC - [][][] - []N with non-porous ink for plastic bags / barrels.

 

   

ADVANCED INDUSTRIAL MICRO SYSTEMS All rights reserved.