<< Please Visit here
OUR PRODUCTS
TABLE TOP HOT FOIL CODER (MOTORIZED / PNEUMATIC) - MODEL HFC
AIMS compact Motorized Hot – Foil coder for Semi-automatic / Manual Table – Top registered printing of B.No., Mfg.Dt., Exp.Dt., M.R.P. Rs., Logos, etc. on labels, pouches, cartons, boxes, etc. or for Online registered printing on any intermittent FFS (Form Fill Seal), Oil / Milk Pouch Packing machine, etc. Model HFC-30-T.
For
the tabletop system, the coder is mounted on a stand and the item to be
printed is placed manually and either a foot switch is pressed or a
timer activates to code semi-automatically.
For the on-line system, the print head is mounted on the machine and coding is done whenever the parent machine stops for sealing. It is electronically synchronized with the packaging machine to give registered coding at exact location.
For the manual system, the item to be printed is placed one at a time below the print head on the table & gets printed whenever the handle is pressed manually.
INTRODUCTION:
These
coders are ideal for Semi-Automatic
Coding. As soon as the product is put on the platform, coding is
done automatically.
The
3-line message to be printed is easily composed by pushing the Brass
Stereos into the grooves & tightening them. The inking is in the
form of Foil ribbon, which passes below the stereos & is advanced
automatically after each print. The brass stereos are heated to a
temperature of around 150 deg. C & hit the film onto the substrate
thus transferring the print with embossing.
These are portable, compact and easy to install units. Simply plug the system into any electrical outlet of 230 VAC at your site to start printing.
FEATURES:
* DC motor based very compact, lightweight and
portable design.
* Online model to be used as a replacement for
Electro-Pneumatic coders (does not require
compressor) for Packaging Machine mounting.
* Very low cost machine with low operating and
inventory costs. Uses metal stereos and foil ribbon to
give very clear & sharp impression which is better
than pre-printed & has no drying time so no
smudging.
* In built speed control for automatic timed operation
(settable) or can be connected to any sensor or foot
switch for controlled operation.
* Imported motor and accessories provide reliability &
long life.
SPECIFICATIONS
:
VARIATIONS
/ DIFFERENT MODELS:
Model
HFC - 30 - T
[] for stand alone
Table Top Coder.
Model
HFC - 30 - O
[]for direct mounting
on Packaging Coder.
Model
HFC - 30 - M
for Manual Table Top Coder.
Model
HFC - 30 - []M
for Motor driven Coder.
Model HFC - 30 - []P for Pneumatic Cylinder driven Coder.